You have no items in your shopping cart.
OPT-VGA300
Product Description
VGA TO CAT5 EXTENDER
With Technology advancement, the demand for the use of Traditional VGA and Audio over a longer distance increases. That is why OPTVIO presents you with the VGA Cat5 Extender.
OPT-VGA300 provides the distribution of VGA and Audio signal over a long distance of up to 1000 feet (300 Meter). It comes with a featured powered circuit to boost VGA signal up to resolution of 1280 x1024.
For best visual and audio performance, we recommend the use of OPTVIO Cat6 UTP cable. For transmission more than 100 Meter, the following cable would be recommended:
OPTVIO Cat6 UTP, Belden Data Twist 350 UTP - #1700A, Belden Video Twist - #7988P, Belden Media Twist #1872A or Belden Video Twist - #7989P
| TRANSMITTER (OPT-VGA300-TX) | |
| INPUT | : 1 x VGA (For PC, Laptop, Visualizer, and etc) : 1 x 3.5mm Audio connection : 1 x 5V DC Power |
| OUTPUT | : 1 x VGA (For LCD Monitor) : 1 x 3.5 mm Audio connection (for Speaker) : 1 x CAT5 (RJ-45 connection) |
| RECEIVER (OPT-VGA300-RX) | |
| INPUT | : 1 x CAT5 (RJ-45 connection ) : 1 x 5V DC Power |
| OUTPUT | : 2 x VGA (To Projector, LCD TV, and etc) : 2 x 3.5 mm Audio connectionr |
Pricing is based on per set (Inclusive of Transmitter and Receiver)
Stock Available. Please call OPTVIO to ask for quote
(+65) 6684 9668
| • Transmitter / Local Unit will send the source signal (VGA and Audio) to DISPLAY end through Cat5e STP | |
| / Cat6 UTP cable. | |
| • Receiver / Remote Unit will receive the source signal from the Transmitter / Local Unit through a Cat5e / Cat6. | |
| The VGA port will be connected directly to the DISPLAY (Projector, LCD TV, Monitor, and etc). The Audio port | |
| will be connected to the DISPLAY Audio source or the Speaker. | |
| • Supported resolution 1280x1024, 32 bits XGA | |
| • Transmission length up to 300M (1000 ft) | |
| • Receiver / Remote comes with FINE TUNING capability | |
| - Brightness Knob to adjust the brightness gain | |
| - Picture Knob for fine focus adjustment | |
| - RGB Skew adjustment (Located at the back of the housing) | |
| * The Tact switches are use to adjust the RED(R), GREEN (G), and BLUE (B) images | |
| INDIVIDUALLY . The "+" and "-" are use to adjust the video delay to obtain optimum graphic result. | |
| • Bandwidth up to 350MHz | |
| • Small and Elegant ( L: 121mm x W: 87mm x H: 27mm) | |
| • Comes with DC5V/1A adapter | |
4 port / 8 port Splitter Transmitter/ Local Unit Are Also Available. Please Call Our Sales For More information.
Additional Information
| Downloads |
Product Tags
Other people marked this product with these tags:
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.