OPT-VGA300-8PTX

CAT 5 Extender Splitter (8 Port)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • CAT 5 Extender Splitter (8 Port)

OPT-VGA300-8PTX

Be the first to review this product

Availability: In stock.

Ask for quote

Quick Overview

VGA TO CAT5 EXTENDER 8 PORT SPLITTER

•  Supported  resolution 1280x1024, 32 bits XGA
•  Transmission length up to 300M (1000 ft)
•  Bandwidth up to 350MHz
•  Small and Elegant ( L: 160mm x W: 115mm x H: 50mm)
•  Comes with DC12V/1A adapter

 

Pricing is based on per set of 8 Port Transmitter
Stock Available.   Please call OPTVIO to asked for Quote

(+65) 6684 9668

Product Description

VGA TO CAT5 EXTENDER 8 PORT SPLITTER

With Technology advancement, the demand for the use of Traditional VGA and Audio over a longer distance increases. That is why OPTVIO presents you with the VGA Cat5 Extender Splitter.

OPT-VGA300-8PTX provides the distribution of VGA and Audio signal over a long distance of up to 1000 feet (300 Meter). It comes with a featured powered circuit to boost 8 x VGA signal up to resolution of 1280 x1024.

For best visual and audio performance, we recommend the use of OPTVIO Cat6 UTP cable.  For transmission more than 100 Meter, the following cable would be recommended:
OPTVIO Cat6 UTP, Belden  Data Twist 350 UTP - #1700A,  Belden Video Twist - #7988P, Belden Media Twist #1872A or Belden Video Twist - #7989P

TRANSMITTER  (OPT-VGA300-8PTX)
INPUT: 1 x VGA (For PC, Laptop, Visualizer, and etc)
: 1 x 3.5mm Audio connection  
: 1 x 5V DC Power
OUTPUT: 1 x VGA (For LCD Monitor)
: 1 x 3.5 mm Audio connection (for Speaker)
: 8 x CAT5  (RJ-45 connection)

 

RECEIVER  (OPT-VGA300-RX) - To be purchase Seperately
INPUT: 1 x CAT5 (RJ-45 connection )
: 1 x 5V DC Power
 
OUTPUT: 2 x VGA (To Projector, LCD TV, and etc)
: 2 x 3.5 mm Audio connectionr

 

Pricing is based on per set of 8 Port Transmitter
Stock Available.   Please call OPTVIO to asked for Quote

(+65) 6684 9668

 

Specification

•  Transmitter / Local Unit will send the source signal (VGA and Audio) to DISPLAY end through Cat5e STP
    / Cat6 UTP cable.
•  Receiver / Remote Unit will receive the source signal from the Transmitter / Local Unit through a Cat5e / Cat6.
   The VGA port will be connected directly to the DISPLAY (Projector, LCD TV, Monitor, and etc). The Audio port
   will be connected to the DISPLAY Audio source or the Speaker.
•  Supported  resolution 1280x1024, 32 bits XGA
•  Transmission length up to 300M (1000 ft)
•  Receiver / Remote comes with FINE TUNING capability
   - Brightness Knob to adjust the brightness gain
   - Picture Knob for fine focus adjustment
   - RGB Skew adjustment (Located at the back of the housing)
       * The Tact switches are use to adjust the RED(R), GREEN (G), and BLUE (B) images
          INDIVIDUALLY . The "+" and "-" are use to adjust the video delay to obtain optimum graphic result
•  Bandwidth up to 350MHz
•  Small and Elegant ( L: 160mm x W: 115mm x H: 50mm) 
•  Can be cascaded up to 21 port
•  To be used together with OPT-VGA300-RX
•  Comes with DC12V/1A adapter

 

Additional Information

Downloads

Brochure | Setup Configuration

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.